Hi Mike,

1.Yes, when we did the integration with the external system we faced the data duplicacy issue.

We created the external Id field on the objects through that we were able to resolve the duplicacy issue.

2. We also faced the issue on API limit get exceeded.

This was because there was huge data on external system and it was getting… Read more

Hi Bhavesh,

I don't think so it's possible. Because once you add any field to the managed package it cannot be removed.

If we depreciate it stops that URL to get installed anywhere else.

There is one patch org. I don't know whether is it supported by salesforce now. Through that patch org you can get the sub version of you managed package.

Hi Bhavesh,

It is not possible. Because once you add any field to the managed package it cannot be removed.

If we depreciate it stops that URL to get installed anywhere else.

There is one patch org. I don't know whether is it supported by salesforce now. Through that patch org you can get the sub version of you managed package.

Hi Bhavesh,

I don't think so its possible. Because once you add any field to the managed package it cannot be removed.

If we depreciate it stops that URL to get installed anywhere else.

There is one patch org. I don't know whether is it supported by salesforce now. Through that patch org you can get the sub version of you managed package.

Hi Debbie,

You can pass variables using the standard HTTP URL parameters. So from the lead page you can have a link to launch a flow and pass the leadID as the following nax.salesforce.com/flow/myLeadFlow?vaLeadID={!ID}

where vaLeadID is the unique name of the variable in flow.

<apex:page>
<flow:interview name="MyFlow">
<apex:param…

Read more

Hi Debbie,

You can pass variables using the standard HTTP URL parameters. So from the lead page you can have a link to launch a flow and pass the leadID as the following nax.salesforce.com/flow/myLeadFlow?vaLeadID={!ID}

where vaLeadID is the unique name of the variable in flow.

<apex:page>
<flow:interview name="MyFlow">
<apex:param…

Read more

Hi Pranav,

Currently this feature is not available in lightning. I guess it would be available by Spring '17 or Summer '17 releases.

Hi Pranav,

Currently this feature is not available in lightning. I guess it would be availabe by Spring '17 or Summer '17 releases.

Hi Mohit,

Please refer to the link below :-

https://success.salesforce.com/answers?id=90630000000guBkAAI

 

Hi Pranav,

This will lead to a lot of conditionally rendered tags. You might consider having separate page for "view" and separate for "new/edit" but use same controller extension if you really want.

New: /apex/override?retURL=%2F006%2Fo&save_new=1&sfdc.override=1
View:… Read more

Hi Pranav,

You can use the validation rule for this.

Hi Mohit,

The first is casting. The second is calling a static method on the Id class.

One major advantage of the former is that it is more null safe.

Id idVal1 = (Id)null; // works
Id idVal2 = Id.valueOf(null); // blows up

First one is better.

Hi Mohit,

You can configure your remoting call using these three parameters "buffer","timeout" and "escape". Usually written at the end of a call.

You have to look for the parameter "buffer".

Whether to group requests executed close to each other in time into a single request. The default is true.

So to make your individual call to… Read more

Hi Tanu,

Here is the sample code :-

Note :- For youTube use their embed URL instead of buffering URL.

Hi Mohit,

By account fields do you mean the account name records or something else?

Hi Mohit,

There can be multiple ways to achieve this :-

1. Create a command button. On the click of it go back into the controller and perform the operation.
2. Create a html button and perform the operation on the page under the script.

Hi Mohit,

I think the below link will help.

http://salesforce.stackexchange.com/questions/73837/reassign-an-existing-case-using-active-assignment-rules

Hi Tanu,

System.abortJob(Id) can do this. Simply pass in the Id of the CronTrigger for the job in question.

Hi Tanu,

Please refer to the link here. Hope this resolves.

https://developer.salesforce.com/forums?id=906F000000090uhIAA

Hi Bhavesh,

According to me html coding should be the good option because HTML is light weighted.

Hi Pranav,

public class sampleCon{
public string strSelCountry {get; set;}
public List<SelectOption> lstCountries {get; set;}

public sampleCon(){
strSelCountry = 'DELHI';
}
public List<SelectOption> getCountries() {
List<SelectOption> options = new List<SelectOption>();
options.add(new…

Read more

Hi Pranav,
You can create two Approval processes for same object , but make sure entry criteria of two processes are mutually exclusive (two entry criteria do not overlap ) . when you submit the record for approval salesforce will pick the Approval process it should be submitted to by matching entry criteria against submitted record values.

Hi Tanu,

It is not possible to add any button the standard report page. You have to create a VF page and use the renderAs="pdf" attribute to achieve this. Instead of coding the entire report in your VF page, you can embed the standard report in your page and add a button to the VF page which will generate the pdf.

I hope this helps.

Hi Arun,

Which event you are using?

Hi Tanu,

You can use the validation rule to validate the rest of the fields on the basis of checkbox.

Hi Pranav,

Please go through this document. I hope this will help.

https://developer.salesforce.com/page/An_Introduction_to_Force.com_Sites

Hi Arun,

Which condition you are using with the inputfield?

Hi Aurn,

Which condition you are using with the inputfield?

Hi Mohit,

It might not possible to create Group using standard user.

Group objGroup = new Group(Name = 'TestGroup1', Type='Regular');
insert objGroup;

The above code works for System Administrator profile, but it does not work for Standard User.

No, I dont think so. Because custom error message are calculated at  different phase of the page lifecycle. Before that the standard message are validated and displayed.

Hi Bhavesh,

There must be Matching Rules on Account which are active in your org. This rules validate the address. There must be accounts exist in your org with the same address with which you are trying to create the new account.

These are the standard salesforce rules which are by default active. When you will deactivate these it will… Read more

Hi Bhavesh,

There must be Matching Rules on Account which are active in your org. This rules validate the address. There must be accounts exist in your org with the same address with which you are trying to create the new account.

These are the standard salesforce rules which are by defualt active. When you will deactivate these it will… Read more

Hi Mohit,

Below is the sample code :-

<apex:page>
<script>
function getRemoteData(callback) {
PieChartController.getRemotePieData(function(result, event) {
if(event.status && result && result.constructor === Array) {
callback(result);
}
});
}
</script>

<apex:chart data="getRemoteData" ...></apex:chart>
</apex:page>

@RemoteAction
public… Read more

Hi Mohit,

Here is the sample code :-

<apex:page controller="ExportToExcelMultipleSheets" contentType="txt/xml#myTest.xls" cache="true">
<apex:outputText…

Read more

Hi Mohit,
Apex:inputField does not have the attribute "disabled". You may have to do this through rendering or jQuery.

Below is the sample code for rendering :-
Sample Code:

Visualforce page:

<apex:page controller="sample">

<script type="text/javascript">

</script>

<apex:form >

<apex:pageMessages />

<apex:pageBlock…

Read more

Hi Tanu,

For synchronous testing: The RunTestsResult returned by calling ApexService.runTests() contains a codeCoverage property, which is a CodeCoverageResult array.

The CodeCoverageResult locationsNotCovered property gives you the line number and column of code that wasn't tested in the run.

My experience with this is that it will return… Read more

Hi Tanu,

Using insert/update/delete in constructor is a bad practice in any language.

Establishing connection to DB - OK.
Constructor is used to create an object and initialize it's parameters; nothing more.
1. Using DML in constructor will slow down initialization of your object.

2. It may fail and object just doesn't create at all.

Hi Tanu,

Yes, here is the sample code :-

Set<Id> ids = new Set<Id>{'001C000001DgWqW','001C000001DgWsE'};
Set<String> idStrs = (Set<String>)JSON.deserialize(JSON.serialize(ids), Set<String>.class);

System.debug('idStrings=' + idStrs);

Hi Pranav,

Please refer to the link below:-

https://developer.salesforce.com/docs/atlas.en-us.lightning.meta/lightning/js_helper.htm

https://developer.salesforce.com/blogs/developer-relations/2015/04/lightning-components-javascript-api.html

I hope it helps.

Hi Pranav,

Please refer to the code below :-

<apex:page controller="AccountRec_Barchart" docType="html-5.0" title="Bar chart" >
<apex:form >

<apex:outputText value="from Date">
</apex:outputText>
<apex:input type="date" value="{!fromdate}"/>
<apex:outputText value="ToDate"></apex:outputText>
<apex:input type="date"…

Read more

Hi Pranav,
Your log will need to be significantly smaller as the skipped section is over 7MB.

One way to reduced the log size is to adjust the logging levels. See Setting Debug Log Filters.

You could keep the Apex Code Log Level set to DEBUG and then reduce the other categories to be off.

Hi Ajit,

Here is the link which will help you to build the lightning component. Please refer to this link  :-

https://trailhead.salesforce.com/en/projects/slds-lightning-components-workshop

I hope this helps.

Hi Ajit,

Here is the link which will help you to build the lightning component. Please refer to this link  :-

https://developer.salesforce.com/trailhead/project/slds-lightning-components-workshop/slds-lc-6

I hope this helps.

Hi Tanu,

You can use this formula example to validate against usage of those special characters and checking if there are spaces at the end.

OR(
CONTAINS( Text_Field__c , "'"),
CONTAINS( Text_Field__c , '"'),
CONTAINS( Text_Field__c , ","),
CONTAINS( Text_Field__c , "*"),
CONTAINS( Text_Field__c , "%"),
CONTAINS( Text_Field__c…

Read more

Hi Pranav,

Please refer to the link below. I hope this will help.

https://developer.salesforce.com/page/Adding_CAPTCHA_to_Force.com_Sites

Hi Mohit,

The Tooling API can be used to retrieve the SymbolTable for each apex class. This Symbol Table will tell you the methods that are defined in the apex class, and the references to methods that are consumed in the externalReferences.

By scanning the methods and corresponding references in each apex classes symbol table you can… Read more

Hi Pranav,

Test__c trigObj = trigger.newMap.get(Test.id);
if(trigObj != null){
trigObj.addError('Cloned record should not have the same period as that of Parent record');
}